Encoder Disk L - GRAPHTEC CE LITE-50 Service Manual

6.2.13 Encoder Disk L

How to detach the encoder disk L
(1) Detach the left side cover (See subsection 6.1.2.).
(2) Detach the cam board L (See subsection 6.2.11.).
(3) Remove the M3L6 self-tapping screw holding the encoder disk L, and then detach the encoder
disk L.
M3L6 self-tapping screw
How to reinstall the encoder disk L
(1) Align the notch of the encoder disk with the rib of the camshaft.
(2) Tighten the M3L6 self-tapping screw to hold the encoder disk L.
(3) Reattach the other parts in the reverse order in which they were detached.
CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-27