Hardware Information; Appearance - ICP DAS USA ECAT-2000 Series User Manual

ECAT-2000 series EtherCAT Slave I/O module

2. Hardware Information

2.1 Appearance

The front panel and top panel of the ECAT-2000 series module contain the I/O connector, LEDs,
Ethernet Port and power connector.
Top Panel
2. EtherCAT Interface
1. DC Power Input Connector
The "+Vs" and "GND" pins are used for the power supply applies to all types of ECAT-2000 series
module. The valid power voltage range is from +10 to +30 V
The definition of "F.G." (Frame Ground): Electronic circuits are constantly vulnerable to
Electrostatic Discharge (ESD), which becomes worse in a continental climate area. ECAT-2000
series module feature a new design for the frame ground, which provides a path that bypasses
ESD, resulting in an enhanced ESD protection capability and ensuring that the module is more
reliable.
2. EtherCAT Interface
ECAT-2000 series modules are equipped with two RJ-45 EtherCAT Interface ports. IN is EtherCAT
signal input port that connect EtherCAT Master or EtherCAT signal output of previous EtherCAT
slave module，OUT is EtherCAT signal output that connect the next EtherCAT signal input of
EtherCAT slave module.
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
1. DC Power Input
Connector
.
DC
- 9 -