Hardware Information; Appearance - ICP DAS USA MDC-700 Series User Manual

2. Hardware Information
2.1. Appearance
Ethernet Port
LED Indicator
The LED is used as a heartbeat indicator and slows to approximately one flash per second.
Ethernet Port
Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E‐mail: service@icpdas.com ‐ 7 ‐
The MDC‐700 is equipped with a RJ45 port for Ethernet LAN
connection. When 100BASE‐TX is operating, the 10/100M LED
is lit orange. When 10BASE‐T is operating or the machine is
not connected to the network, it is turned off. When an
Ethernet link is detected and an Ethernet packet is received,
the Link/Act LED is lit green.
Connectors: (For MDC
COM3
COM4
COM5
LED Indicator
Configuration Display
Connectors:
Power
COM2
Reset
COM1
‐714/MDC714)