Mazda MX-6 Manual page 125

J94S.book Page 9 Saturday, June 23, 2001 1:04 PM
5. A djust the fan control dial and
tem perature control dial to m aintain
m axim um com fort.
A CAUTION
W hen using the air conditioner w hile
driving up long hills or in heavy traffic,
closely m onitor the tem perature gauge
(page 5-21).
T he air conditioner m ay cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner
off.
N O T E
W hen m axim um cooling is desired,
set the tem perature control dial to
the extrem e cold position and set
the air intake selector sw itch to the
recirculated air position, then set the
fan control dial to the position 4.
If w arm er air is desired at floor
level, set the m ode selector sw itch
at the c l position and adjust the
tem perature control d ial to m aintain
m axim um com fort.
T he air to the floor is w arm er than
air to the face (except w hen the
tem perature control d ial is set at the
extrem e hot or cold position).
Form No. 8Q50-EA-01G
Climate Control System
▼ Ventilation
1. Set the m ode selector sw itch to the
position.
2. Set the air intake selector sw itch to the
outside air position (indicator light off).
3. Set the tem perature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
▼ Windshield Defrosting and
Defogging
Interior Com fort
6-9