Table of Contents
Advertisement
SMARTLINE® RM60 (FMCW)
Figure 6-9: Indication of errors
1 Error/ warning symbol
Enter the supervisor mode to either:
• Do an error status check, or
• Read the error records and get more data about the error.
How to check the measurement quality
• Enter supervisor mode.
• Go to Test > Information > Measurement Quality
Test > Information > Measurement Quality
Test > Information > Measurement Quality.
Test > Information > Measurement Quality
i
This shows the status of device errors at this time. A "tick" symbol next to an error in the
list shows that this error is active and may have an unwanted effect on the device.
• For solutions to the problem, refer to
Figure 6-10: Measurement quality in supervisor mode
1 Type of error.
2 Error "active"
34-VF-25-31 iss.4 GLO December 15 US
Error handling
on page 73.
www.honeywell.com/ps
OPERATION
6
71
Advertisement
Table of Contents
