Table of Contents
Advertisement
SAFETY INSTRUCTIONS
1
1.4 Electromagnetic compatibility
The device design agrees with European Standard EN 61326-1.
You can install the device on open-air tanks and tanks that are not made of metal. But refer to
Radio approvals
industrial environments.
INFORMATION!
Device operation agrees with residential-class (class B) immunity and emissions requirements if
the antenna is used in a closed silo made of metal.
1.5 Radio approvals
1.5.1 European Union (EU)
LEGAL NOTICE!
This level transmitter is intended for installation in closed metallic tanks and open-air
installations. It meets the requirements of the R & TTE (Radio Equipment and
Telecommunications Terminal Equipment) Directive 1999/05/EC for use in the member
countries of the EU.
The device operates using a frequency band (24...26 GHz) that is not harmonized within the EU.
According to article 6.4 of the R&TTE Directive, the product is marked by the CE sign + notified
body number (0682) + Class II identifier (= alert sign).
Refer to EN 302372 and EN 302729 for installation conditions.
Figure 1-1: Radio approval information on the nameplate
1 CE sign
2 Notified body number (0682 = CETECOM)
3 Class II identifier
According to ETSI EN 302 372-2 (2011), the radiated power outside a metallic silo is less than
-30 dBm.
10
on page 10. This agrees with Immunity and Emissions requirements for
www.honeywell.com/ps
SMARTLINE® RM60 (FMCW)
34-VF-25-31 iss.4 GLO December 15 US
Advertisement
Table of Contents
