Honeywell SmartLine RM60 Handbook page 46

OPERATION
6
Screens in operator mode
Text and image
screen
Level
[ ] / [ ]
Distance
[ ] / [ ]
Volume
[ ] / [ ]
Mass
[ ] / [ ]
Ullage volume
Back to the top of the
1 This data is only available if you created a volume table. Refer to the conversion quick setup menu in supervisor mode.
2 This data is only available if you created a mass table. Refer to the conversion quick setup menu in supervisor mode.
3 This screen shows a graph of discrete radar reflection signals against distance. This graph is used to monitor reflec-
tions measured by the device. Push [>] to move the cursor from one signal peak to another.
46
Go to
[ ]
[> > > > ]
[> > > > ]
[> > > > ]
1
[> > > > ]
2
[> > > > ]
1
[ ]
list
% current output
screen
[ ]
Level
[ ] / [ ]
Distance
[ ] / [ ]
Volume
1
[ ] / [ ]
Mass
2
[ ] / [ ]
Ullage volume
1
[ ]
Back to the top of the
list
www.honeywell.com/ps
SMARTLINE® RM60 (FMCW)
Go to Text screen
[ ]
> Level
[ ] / [ ]
[> > > > ] Distance
[ ] / [ ]
[> > > > ] Volume
1
[ ] / [ ]
[> > > > ] Mass
2
[ ] / [ ]
[> > > > ] Ullage volume
[ ] / [ ]
Reflectivity
[ ] / [ ]
Signal screen
[ ]
Back to the top of the
list
34-VF-25-31 iss.4 GLO December 15 US
Go to
> (Text
and
image)
[> > > > ] (Text
and
image)
[> > > > ] (Text
and
image)
[> > > > ] (Text
and
image)
[> > > > ] (Text
1
and
image)
3