Table of Contents
Advertisement
INSTALLATION
3
3.7.5 How to attach the weather protection to the device
Equipment needed:
• Device.
• Weather protection (option).
• 10 mm wrench (not supplied).
The overall dimensions of the weather protection are on page 96.
Figure 3-15: Installation of the weather protection
• Loosen the bracket nuts on the weather protection.
• Remove the bracket.
• Lower the weather protection onto the device.
• Turn the weather protection so that the keyhole points forward.
• Attach the bracket.
• Lift the weather protection to the top of the housing support pillar.
• Hold the weather protection in the correct position and tighten the bracket nuts.
32
www.honeywell.com/ps
SMARTLINE® RM60 (FMCW)
34-VF-25-31 iss.4 GLO December 15 US
Advertisement
Table of Contents
