Save & Exit Setup; Exit Without Saving - VIA Technologies VT82C686A User Manual

Mainboard User's Manual
Enter Password:
3. If you are installing a new password, type in the password.
You cannot use more than eight characters or numbers. The Set
Supervisor/User Password item differentiates between upper
case and lower characters. Press <Enter> after you have typed
in the password. If you are deleting a password that is already
installed just press <Enter> when the password dialog box
appears. You see a message that indicates that the password
has been disabled.
PASSWORD DISABLED !!!
Press any key to continue . . .
4. Press any key. You are prompted to confirm the password:
Confirm Password:
5. Type the password again and press <Enter>, or just press
<Enter> if you are deleting a password that is already installed.
6. If you typed the password correctly, the password will be
installed.
Save & Exit Setup
Highlight this item and press Enter to save the changes that you
have made in the Setup Utility configuration and exit the program.
When the Save and Exit dialog box appears, press Y to save and
exit, or press N to exit without saving.

Exit Without Saving

Highlight this item and press Enter to discard any changes that
you have made in the Setup Utility and exit the setup program.
When the Exit Without Saving dialog box appears, press Y to
discard changes and exit, or press N to return to the setup main
menu.
42