Peri MULTIPROP Instructions For Assembly And Use page 31

A5 Bracing MULTIPROP Towers
Support in units
Assembly
1. Arrange MULTIPROP Towers in the
grid of the Frames MRK.
2. Install Frame MRK between the
towers. (Fig. A5.03)
3. Hammer in wedges.
4. Install push-pull props at the prop
joints. (Fig. A5.03a)
Alternatively:
Connections with scaffold tubes
1. Fix Scaffold Tube Couplers MG to the
MULTIPROP Props.
2. Connect MULTIPROP Towers with
scaffold tubes. (without illustration)
MULTIPROP System
Instructions for Assembly and Use – Standard Configuration
Fig. A5.03a
Fig. A5.03
13
29