Steering Head Bearing - Honda CM 185T 1981 Manual

INSPECTION/ADJUSTMENT
WHEEL SPOKE RETIGHTENING
Retighten the wheel spokes periodically.
T I G H T E N I N G TORQUE: 0 . 2 - 0 . 3 5 kg-m
( 1 . 4 - 2 . 5 ft-lb.)

STEERING HEAD BEARING

NOTE
Check that the control cables do not
interfere w i t h the rotation of the handle-
bars.
Raise the front wheel off the ground.
Check that the handlebar rotates freely. If
the handlebar moves unevenly, binds or has
vertical movement, adjust the steering head
bearing by turning the steering head adjusting
nut w i t h a pin spanner.
NUTS. BOLTS. FASTENERS
Retighten the bolts, nuts and fasteners related
frame at regular intervals shown the Mainte-
nance Schedule and for the tightening torque,
refer to Torque Specification (see page 1-6).
3-18
^ f e y C M 1 8 5 T
Date of Issue: December, 1977
© H O N D A MOTOR CO., L T D .