Honda CM 185T 1981 Manual page 100

CM 1 8 5 T CLUTCH/OIL PUMP/GEAR SHIFT/KICK STARTER
• ASSEMBLY
Install the gear shift spindle.
NOTE
Insert the end of the return spring around
the return spring pin.
Install the stopper arm.
NOTE
Install the spring as shown.
After installing, check stopper arm oper-
ation.
Install the stopper plate.
NOTE
Insert pin into hole of the stopper.
Tighten the stopper plate setting bolt.
NOTE
I After reassembly, check for operation.
Date of Issue: December, 1977
© H O N D A MOTOR CO.. L T D .
8-13