Honda CM 185T 1981 Manual page 33

INSPECTION/ADJUSTMENT
• BRAKE LINKAGE INSPECTION
Check the brake rod/cable and brake lever/
pedal for loose connections, excessive play,
bending or other damage. Replace or repair
if necessary.
Inspect the brake and stopper arms for loose
connections or damage. Check the cotter pin
is installed properly.
STOPLIGHT SWITCH
Perform this adjustment after adjusting rear
brake pedal free play and height.
The stoplight should come on when the brake
pedal is depressed 20 mm (3/4 in.) f r o m the
standard position.
Adjust by turning switch adjusting nut.
3-14
Date of Issue: December, 1977
© HONDA MOTOR CO., L T D .