Honda CM 185T 1981 Manual page 126

TRANSMISSION/CRANKSHAFT
Install the oil seal.
CA UTION
drive
Do not the countershaft oil seal
below the end of the crankcase as tha,
will
block up the oil passage in the shaft.
Install the O-ring and the oil through plate,
Tighten the screws.
NOTE
Apply locking agent to the screws.
• R I G H T C R A N K C A S E
Install the bearing w i t h a bearing driver.
Date of Issue: December. 1977
© H O N D A MOTOR CO., L T D .
10-9