Honda CM 185T 1981 Manual page 161

REAR WHEEL/REAR SUSPENSION
• REAR SPROCKET ASSEMBLY
Install the fixing bolts.
NOTE
Be sure the fixing bolts are seated in
the sprocket groove properly.
Grease the left side of rear wheel hub and
inside of the driven sprocket.
Install the sprocket and snap ring.
NOTE
Install w i t h the cutout of the snap ring
facing the sprocket.
Tighten the four nuts.
\ S /
F I X I N G BOLT
F I N A L D R I V E N
SPROCKET
TORQUE:
Date of Issue: December, 1977
© H O N D A MOTOR CO., L T D .
C M 1 8 5 T
SNAP RING
5 . 5 - 6 . 5 kg-m
( 3 9 . 8 - 4 7 . 0 ft-lb.)