CM 1 8 5 T
CLUTCH/OIL PUMP/GEAR SHIFT/KICK STARTER
Install the 20 mm circlip.
Install the springs and lifter plate and tighten
the bolts.
NOTE
Tighten the bolts in two or more steps
and in
cross pattern.
Install the clutch drive gear and oil pump
drive gear.
Install the lock washer and pin.
NOTE
Install the washer w i t h the word " O U T -
S I D E " facing the right side.
Tighten the 14 mm lock nut.
TORQUE:
4 . 5 - 6 . 0 kg-m ( 3 2 . 5 - 4 3 . 4 ft-lb.)
Date of Issue: December, 1977
© H O N D A MOTOR CO., L T D .
8-7