Honda CM 185T 1981 Manual page 74

CYLINDER HEAD/VALVES
Install the dowel pins into the holes in the
cylinder head.
Loosen the adjusting screws fully and install
the camshaft holder.
NOTE
Install the camshaft holder w i t h the "F
marks to the front.
Torque in the sequence shown.
TORQUES:
N U T 1 . 6 - 2 . 0 kg-m ( 1 1 . 6 - 1 4 . 5 ft-lb.)
B O L T 1 . 0 - 1 . 4 kg-m ( 7 . 2 - 1 0 . 1 ft-lb.)
NOTE
Tighten an X pattern in 2-3 steps.
6-20
DOWEL PINS
Date of Issue: December, 1977
© HONDA MOTOR CO., L T D .