Honda CM 185T 1981 Manual page 72

CYLINDER HEAD/VALVES
CAMSHAFT AND ROCKER ARM
INSTALLATION
Assemble the rocker arms and springs by
installing the rocker arm shaft into the cam-
shaft holder.
NOTE
• A p p l y a thin coat of oil to the shafts
before assembly.
• Install each shaft w i t h the threaded
end facing out.
Slide cam chain and cam sprocket onto the
camshaft.
Turn the rotor and align the " T 1 " mark to
the index mark.
6-18
ROCKER A R M
ROCKER A R M SPRING
CAMSHAFT HOLDER
Date of Issue: December, 1977
© H O N D A MOTOR CO.. L T D .
CAM SPROCKET