Honda CM 185T 1981 Manual page 144

STEERING/FRONT WHEEL/FRONT SUSPENSION
Grease the sliding surface of the brake cam
and install.
Install the return springs on the brake shoes.
Install the washer.
Insert the cotter pin and spread the ends as
shown.
WARNING
A void getting grease on the brake lining.
Install the dust seal and the indicator pla.te
on brake cam.
NOTE
Align the cutouts.
Install the return spring and brake arm.
Tighten the brake arm bolt and nut.
NOTE
Align the punch marks.
Date of Issue: December, 1977
© H O N D A MOTOR CO., L T D .
COTTER PIN
WASHER
INDICATOR PLATE
B R A K E CAM CUTOUTS
B R A K E CAM
B R A K E A R M
TORQUE:
0 . 8 - 1 . 2 kg-m
( 5 . 8 - 8 . 6 ft-lb.)
11-13