Side Stand - Honda CM 185T 1981 Manual

INSPECTION/ADJUSTMENT
Minor adjustments are made at the upper
adjuster by loosening the lock nut and turning
adjuster.
Recheck the clutch operation.

SIDE STAND

Check the rubber pad for deterioration or
wear.
Replace if any wear extends to wear line as
shown.
Check the side stand spring for damage and
loss of tension, and the side stand assembly
for freedom of movement.
NOTE
When replacing use a rubber pad w i t h
the mark "Over 260 lbs. O N L Y " .
Spring tension is correct if the measure-
ments fall w i t h i n 2 - 3 kg (4.4—6.6 lb.)
when pulling the side stand lower end
using a spring scale.
3-16
GOOD NO GOOD
WEAR LINE
Date of Issue: December, 1977
© HONDA MOTOR CO., L T D .