Step 2
Configure the parameters. See Table 6-36.
Parameter
Input Name
Name Preview
Picture Path
Record Path
Step 3
Click OK to save the configuration. Click Refresh to refresh the interface. Click Default
and then OK to restore to default settings.
6.5.7 System
You can configure system information, add users, restore to factory settings, import and export
system configuration files, etc.
6.5.7.1 General
6.5.7.1.1 General
It is to configure the device code, system, video standard, etc.
Step 1
Select Setting > System > General > General.
The General interface is displayed. See Figure 6-107.
Table 6-35 Path
Table 6-36 Path setting
Description
You can enter the name of storage path. Click Reset to reset the storage
path name.
You can preview of name you have entered. Click Help... to check the
Picture Naming Help.
Click Browse and select the path you want to save the picture.
Click Browse and select the path you want to save the record.
Web Configuration 89