Table of Contents
Advertisement
Select Setting > ITC > Device Direction. The Device Attitude interface is displayed. See
Figure 6-80.
Check Enable, and then click OK. Click Refresh to refresh the interface. Click Default, and
then OK to restore to default settings.
6.5.1.12 Intelligence Default
Select Setting > ITC > Intelligence Default. The Intelligence Default interface is displayed.
See Figure 6-81.
Click Default, and then a prompt box pops up. Click Yes, and the settings of Lane Property,
Snapshot and Intelligent will be restored to factory settings.
6.5.2 Camera
You can configure the camera attributes, and configure the parameters of shutter, iris and
metering zone.
Figure 6-80
Device attitude
Figure 6-81
Intelligence default
Web Configuration 71
Hide quick links:
Advertisement
Table of Contents
