Ptz - Dahua Technology DHI-ITC952-RF2D User Manual

6.2.2 PTZ

You need to zoom in/out and focus the video image to get clear image. The Camera
automatically zooms in/out and focuses at preset points in different modes (day/night). The
following steps provide guides in resepct of zoom in/out and focus as well as configuring preset
points.
Step 1 Click Next after configuring the work mode, or click PTZ.
The PTZ interface is displayed. See Figure 6-13.
Click Back and you can return to configure the Work Mode.
Step 2 Click Reset to clear all the previous operations (if any) to the PTZ.
Figure 6-12 Refresh
Figure 6-13 PTZ
Web Configuration 23