Removing The Lens; Tf Card; Installing Tf Card - Dahua Technology DHI-ITC952-RF2D User Manual

Step 3 Insert the cable plug of lens into the auto iris lens connector on the side panel of
camera.
Step 4 Correct the focus to make the images clear.

3.1.2 Removing the Lens

Step 1 Unplug the cable from the lens mount.
Step 2 Turn the lens to counter-clockwise until the lens is removed. See Figure 3-3.
Step 3 Install the protective covers of sensor and lens to prevent them from being spotted.
3.2

TF Card

This section takes some models as the example, and the actual model shall prevail.

3.2.1 Installing TF Card

Insert the TF card according to the direction shown by the arrow. See Figure 3-4.
Figure 3-2 Installing the lens
Figure 3-3 Removing the lens
Installation 8