Configtool; Modifying Ip Address - Dahua Technology DHI-ITC952-RF2D User Manual

Get the quick configuration tool by downloading and registering ConfigTool. You can use
ConfigTool to search device IP, modify the IP, and upgrade the system.
This section takes ConfigTool 4.07.0 as the example. Different versions may have different
interfaces, and the actually downloaded ConfigTool shall prevail.
Open ConfigTool, and on the Devices found page, you can see the device information, such
as status, type, model, IP, MAC, and version. See Figure 5-1.
5.1

Modifying IP Address

Step 1 Open ConfigTool.
Step 2 Click
The Modify IP interface is displayed. See Figure 5-1.
Step 3 Click the device that you want to modify the IP.
Modify one device: Click

 Batch modify: Select the devices, and click Modify IP.
Step 4 Configure mode, IP, subnet mask and gateway. See Figure 5-2.
Figure 5-1
.
corresponding to the device.
5

ConfigTool

Main interface
ConfigTool 12