Trigger Mode - Dahua Technology DHI-ITC952-RF2D User Manual

6.2.4 Trigger Mode

This section guides you to configure the trigger mode of snapshot, which covers Radar + Video,
Radar, and Video.
6.2.4.1 ANPR
This section is applicable when ANPR is selected as the Business Type (see "6.2.1 Work
Mode").
Step 1 Click Next after setting Plate-pixel check, or click Trigger Mode.
The Config Guide interface is displayed. See Figure 6-19.
Step 2 Double-click the mode you want to select.
The Radar interface is displayed. See Figure 6-20.

This section takes Radar + Video mode as the example. To configure Radar and
Video modes, see the settings of Radar + Video mode.
Figure 6-19 Trigger mode config mode
Web Configuration 28