Upgrade one device: Click Browse corresponding to the device to be upgraded.
Batch upgrade: Select the device to upgrade, and the click Batch Upgrade.
Step 4
Select the upgrade file. See Figure 5-4.
Step 5
Upgrade the device.
Upgrade one device: Click Upgrade, and the system starts upgrading. You can
see the upgrade progress.
Batch upgrade: Click OK, and the system starts upgrading.
If the device is disconnected during upgrading, as long as the ConfigTool stays on the upgrade
interface, the upgrade will resume when the connection is restored.
5.3
Logging in Web
You can login to web by clicking
Figure 5-4
Select the upgrade file
corresponding to the device. See Figure 5-5.
ConfigTool 14