Table of Contents
Advertisement
Parameter
Capacity Limit
Ethernet Card1,
Ethernet Card2
Max Switch Time
Value
Login Error
Rollover Angel
Threshold
Pitch Angle
Threshold
Acceleration
Threshold
Step 4
Click OK to save the configuration. Click Refresh to refresh the interface. Click Default
and then OK to restore to default settings.
6.5.6 Storage
You can configure information related to storage and record.
6.5.6.1.1 Local
Displays the information of TF card. You can format the card, or select to overwrite or stop
storage when the disk is full.
Select Setting > Storage > Destination > Local. The Local interface is displayed. See Figure
6-104.
You can select to overwrite or stop storage when the disk is full. You can also format or hot
swap the card.
6.5.6.1.2 FTP
FTP function can be enabled only when Snapshot Enable is checked and Enable of server is
selected.
Description
Configure the storage available for triggering abnormality.
Select the Ethernet card that triggers alarm output.
Configure the max time that traffic light remains unchanged.
This function is only available in E-Police mode.
Configure the number of login error allowed. The range is 3–10 times.
Configure the threshold of rollover angle.
Configure the threshold of pitch angle.
Configure the threshold of acceleration.
Figure 6-104
Local
Web Configuration 86
Hide quick links:
Advertisement
Table of Contents
