Dahua Technology DHI-ITC952-RF2D User Manual page 63

Parameter
Car Series Detect
Vehicle Sign
Vehicle Type
Safe Belt Detect
Driver Face Detect Detect the face of the driver.
Call Detect
Vehicle Color
Seating Capacity,
Vehicle Type and
Helmet
Window
enhancing
Right Wheel Drive
Analyse Mode
Valid Range
Plate enhancing
Non-Motor
Category
Step 3 Click OK to save the configuration. Click Refresh to refersh the interface.
6.5.1.4.8 Video Analyse–Kill Halo
You can configure the halo zone, and time and level of halo control to get the snapshot you
need.
This function is only available in E-Police mode.
Step 1 Select Setting > ITC > Intelligent > Video Analyse > Kill Halo.
The Kill Halo interface is displayed. See Figure 6-59.
Figure 6-58 Recognition parameters
Description
Detect the car series of different brands.
Detect the sign of vehicle.
Detect the vehicle type.
Detect whether the safe belt is fastened.
Detect whether the driver calls while driving.
Detect the color of vehicle.
Detect the seating capacity and vehicle type of
non-motorized vehicle, and helmet wearing of the
driver.
Optimize snapshot effect for faces behind the car
window.
Detect right-hand drive. This is applicable to
countries and regions with right-hand drive system.
The mode of detecting number plate.
Four modes are available: Head Mode, Tail Mode,
Head Prior Mode, and Tail Prior Mode.
Configure the min and max width, as well as the min and max height of
vehicle.
Optimize snapshot effect for number plate.
Snapshot non-motor vehicles and pedestrians. After enabling
Non-Motor Category, you can configure the sensitivity. Three
sensitivity levels are available: Low, Medium, and High.
These functions
are only
available in
ANPR mode.
Web Configuration 56