Exercise Computer; Function Button - Insportline ELBE–IN 2846 Manual

EXERCISE COMPUTER

FUNCTION BUTTON

MODE
1. To select each function for presetting.
2. To enter and switch to next function after pressetting.
SET
To make upward adjustment of each function datas of TIME, COUNT and CALORIES.
RESET
To peset each single function of COUNT, TIME and CALROIES.
TOTAL RESET
To clear all preset datas and restart the computer.
FUNCTIONS
SCAN
Automatically scans through each function in every 6 seconds.
TIME
COUNT UP: The monitor will count workout time from 00:00 up to 99:59
COUNT DOWN: If you have preset tatget time, the monitor will count from preset down to
COUNT
COUNT UP: Accumulates workout numbers from zero.
COUNT DOWN: If you have preset tratet count numbers, the monitor will count from preset
TOTAL COUNT
Displays the total number of repetitions cimpleted since the total preset button was last
pressed.
CALORIES
COUNT UP: Accumlates calories consumption during training.
COUNT DOWN: If you have preset target calories, the computer will count from preset
This data is arough guide only and should be used as comparison over several exercise
sessions.
NOTE
7. Without any signal transmitted to the monitor for 4 minutes, the LCD will shut off automatically, and all
function datas would be kept. When you come back training on the equpment directly or pressing any
button, the previous stored datas would display on the monitor.
8. The monitor starts beeping to remind you as soon as any preset rartet datas is achieved to zero.
9. Battery specification: 1.5V AA(2PCS).
00:00 when you start training.
down to zero when you start training.
calories down to zero.