Insportline ELBE–IN 2846 Manual page 40

20
STEP 4
1. Attach the nylon nut (#12) to the end of the left hand side of the spindle bar (#8), and then slide
on to the bar from the right the washer (#15), followed by the plastic bushing (#18) then the
footrest (#10). Then slot the part assembled spindle bar through the hole in the main housing.
Now start to assemble the right hand pedal onto the spindle bar (#8). Slide the pedal (#10) onto
the right hand side of the pedal spindle bar followed by the plastic bushing (#18), the washer
(#15) and finally the M8 nylon nut (#12).
2. Attached the sponge (#20) to left side of the footrest shaft (#9), then slot the footrest shaft (#9)
through the hole in the holder bracket cover and attached another sponge (#20) to the other
side of the bar.
PARTS:
#12
#15
12
15
18
10
#18
8
10
18
15
9
20
12