Insportline ELBE–IN 2846 Manual page 46

FUNCTION BUTTON
PRESS TO HAVE HANDGRIP HEART RATE FIGURES DISPLAY ON THE MONITOR.
FUNCTION
PULSE THE MONITOR WILL DISPLAY THE USER'S HEART RATE WHILE EXERICING. YOU WILL
SEE YOUR CURRENT HEART RATE (BPM) DISPLAY ON THE LCD DURING EXERCISING.
WHEN YOU START TO EXERCISE, YOU HAVE TO HOLD ON GRIPS WITH BOTH HANDS,
AFTER 30 SECONDS TO MAX. 1 MINUTE, THE PULSE FIGURE WILL DISPLAY ON THE LCD.
IF YOU HOLD ON THE GRIP WITH ONE HAND ONLY, THE PULSE FIGURE DISPLAY WILL
BECOME UNSTABLE. FOR THE PULSE READOUT ACCURACY REASON, WE'LL SUGGEST
YOU TO HOLD ON BOTH HANDS DURING EXERCISING. YOU MAY ALSO PRESET TARGET
PULSE TO ASSIST TRAINING. AS SOON AS YOUR CURRENT HEART RATE IS EXCEED THE
TARGET FIGURE, THE MONITOR STARTS TO ALARM TO REMIND THE USER.
NOTE
5. WHEN THERE IS NO SIGNAL BEEN TRANSFERRED INTO THE MONITOR FOR 4 MINUTES, THE
MONITOR DISPLAY WILL SHUT OFF AUTOMATICALLY.
6. IF IMPROPER DISPLAY ON MONITER, PLEASE RE-INSTALL BATTERIES TO HAVE A GOOD RESULT.
7. THE MONITOR REQUIRES 2 PCS OF 1.5V AAA SIZE OR UM-3 BATTERIES.
BATTERIES SHOULD BE REMOVED FORM THE DEVICE IF NOT USED FOR PROLONGED PERIODS.
8.
ALWAYS CHANGE BOTH BATTERIES AT THE SAME TIME.