FUNCTION SETTINGS
5-2-6 Preset Value (
When performing preset, you can shift (add or subtract) to any preset value.
You can set the dimension of a master workpiece as a preset value and use this as a master
value (reference value).
When the preset value is set to "6.0000"
●
<Reference>
● If preset is turned ON when the preset value is "0", zero-point adjustment will take place.
● A preset value setting change will be applied even if the preset has been executed.
● For details, refer to "4-2-2 Presets".
Setting method
Long-press for 2 seconds
Setting item
Preset value (PR. VAL)
5-16
SEN TRONIC
AG
Produkte, Support und Service
)
Current value
CALC: Only appears on master unit
Finalize
Setting range
-199.9999 to 199.9999 (mm)
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Rugghölzli 2
CH - 5453 Busslingen
Preset
: Move through digits
: Change value
0.0000
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Default value
mailbox@sentronic.com
www.sentronic.com