(Master Unit Only); Input All ( ) (Master Unit Only) - Panasonic HG-S Series User Manual

5-3-2 Input All (
You can enable ALL IN on the master unit to input trigger input, preset input, and other signals
into all connected slave units.
Input All
Single (ONE)
All (ALL)
<Reference>
Input All can only be set on a master unit to which slave units are connected.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
SEN TRONIC
AG
Produkte, Support und Service

) (Master Unit Only)

Perform master and slave unit external input individually.
External signals are input into each slave unit according to the external input setting.
When a signal is input into the master unit, the same signal is input into all connected slave
units.
The same signals are input into the slave units as the master unit, regardless of the external
input setting.
ONE (single)
Slave
unit
Rugghölzli 2
CH - 5453 Busslingen
Function
Slave Slave Slave Master
unit unit unit unit
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
FUNCTION SETTINGS
ALL (all)
mailbox@sentronic.com
www.sentronic.com
5-45