Self Peak Hold / Self Bottom Hold - Panasonic HG-S Series User Manual

5-3-1-1-6 Self Peak Hold / Self Bottom Hold

At the end of self trigger start, the data of the sampling interval is automatically held as the judg-
ment value (JUDGE. V).
The hold action can be changed with the trigger mode setting.
■ Self Peak Hold (Trigger mode: Hold)
After the end of self trigger, the peak value during the sampling interval (the interval from the
end to the start of self trigger) is held as the judgment value (JUDGE.V).
The hold state is released at the start of self trigger.
When hold is released, the peak value is cleared and updated whenever necessary.
Self trigger starts when the value rises above (falls below) the self trigger level.
Self trigger ends when the value falls below (rises above) the self trigger level.
Timing chart
HIGH set value
LOW set value
Self trigger
level
Indeterminate when
power is turned ON
ON
TRIG
indicator
OFF
ON
HOLD
indicator
OFF
External
reset
Outputs OUT1 / OUT2 / OUT3 according to output setting.
1. The previous value is held until the self trigger level is exceeded and self trigger starts.
(When the power is turned ON, the indeterminate state is held.)
2. After hold is released with the start of self trigger, the peak value of the normal measured
value (NORM.V) is updated as the judgment value (JUDGE.V) whenever necessary during
the sampling interval.
3. If the reset input turns ON, the indeterminate state is held. If within the sampling interval, the
sampling interval ends.
4. Judgment output outputs the judgment result based on the output setting.
*When the calculation function is used, the calculation value is "CALC".
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
SEN TRONIC
AG
Produkte, Support und Service
Judgment value
(JUDGE.V)
Normal measured
value (NORM.V)*
Self trigger start Self trigger end
Sampling interval
Rugghölzli 2
CH - 5453 Busslingen
Self trigger start
Hold
interval Sampling interval
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
FUNCTION SETTINGS
Due to RESET, NORM.V is
indeterminate during response time
Sampling interval
mailbox@sentronic.com
www.sentronic.com
5-41