Safety Cautions; Safety Information - Panasonic HG-S Series User Manual

INTRODUCTION

1-1 Safety Cautions

This section explains important rules that must be observed to prevent human injury and prop-
erty damage.
■ The hazards that may occur if the product is used incorrectly are described and classified by
level of harm.
WARNING
CAUTION
■ The following symbols are used to indicate safety information that must be observed.
Indicates an action that is prohibited.
Indicates an action that must be taken.
Indicates a matter that requires caution.
Indicates supplemental information.
<Reference>

1-2 Safety Information

● Never use this product as a sensing device for personnel protection.
● When using sensing devices for personnel protection, use products that meet the laws and stan-
dards for personnel protection that apply in each region or country, such as OSHA, ANSI and IEC.
● For the controller DC power supply, only use a power supply that is isolated by means of an isola-
tion transformer or otherwise.
● Risk of short-circuiting and damage to the controller or power supply if a transformer such as an
auto transformer is used. Risk of short-circuiting and damage to the controller or power supply if in-
correctly mounted or connected.
● The controller HG-SC series is designed to be used with the special sensor head HG-S series. If
used with other than the special sensor head option, the specifications will not be met and product
malfunctioning or damage may occur.
1-2
SEN TRONIC
AG
Produkte, Support und Service
Always observe
Risk of death or serious injury.
Risk of minor injury or property damage.
WARNING
CAUTION
Rugghölzli 2
CH - 5453 Busslingen
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com