Presets - Panasonic HG-S Series User Manual

BASIC OPERATION

4-2-2 Presets

<Overview>
You can perform zero-point adjustment, and shift to any preset value.
You can perform reference zero-point adjustment when the sensor head has been replaced or
when the workpiece is changed, and set the dimensions of the master workpiece as preset val-
ues for use as master values (reference values).
<Presets>
1.
Perform master workpiece measurement.
2.
Press the preset key in the master workpiece measurement state.
When the preset function turns ON, the preset indicator (green) lights up.
If the preset value is set to "0.0000" (default setting), you can perform zero-point adjustment.
4-8
SEN TRONIC
AG
Produkte, Support und Service
Preset indicator (green)
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com