External Input; External Input ( ) - Panasonic HG-S Series User Manual

5-3-3 External Input (

You can select from four combinations for the signals that are input into input 1 / input 2 / input 3
of external input.
External input setting combinations are shown below.
External input
Preset / Reset / Trigger (P/R/T )
Bank A / Bank B / Preset (BANK/P)
Bank A / Bank B / Reset (BANK/R)
Bank A / Bank B / Trigger (BANK/T)
● Minimum input time
The minimum input time depends on the input type.
<Preset input>
Preset input
<Reset input>
Reset input
<Trigger input>
Trigger input
<Bank A / B input>
Bank
Bank A
Bank B
*1: Minimum of 50ms when bank save is set to "ALL".
*2: If more than 8ms elapses, data may be read from bank 1 and then bank 2.
<Reference>
● For controller I/O circuit diagrams, refer to "3-6-2 I/O Circuit Diagrams".
● For input all, refer to "5-3-2 Input All (
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
SEN TRONIC
AG
Produkte, Support und Service
)
ON
Preset
OFF
Minimum 20ms
ON
OFF
Minimum 20ms
ON
OFF
Minimum 2ms Minimum 2ms
Bank 1
20ms (*1)
ON
OFF
Minimum 20ms
ON
OFF
Rugghölzli 2
CH - 5453 Busslingen
Input signal combination
Input 1 Input 2
Preset Reset
Bank A Bank B
Bank A Bank B
Bank A Bank B
Minimum 20ms
Minimum 20ms
Minimum 20ms (*1)
) (Master Unit Only)".
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
FUNCTION SETTINGS
Input 3
Trigger
Preset
Reset
Trigger
Preset release
Minimum 1.5 sec.
Bank 3
20ms (*1)
Maximum 8ms (*2)
mailbox@sentronic.com
www.sentronic.com
5-47