Curvature; Curvature ( ) - Panasonic HG-S Series User Manual

5-4-2-7 Curvature (

This function calculates the curvature from measured values at three locations on the measured
object.
Calculated value = (Measured value of master unit + Measured value of slave unit 2)
÷ 2 - Measured value of slave unit 1
• The two slave units closest to the master unit do not output a judgment result. (Always OFF)
If three or more slave units are connected, the 3rd and subsequent slave units perform
normal judgment without calculation.
• The sensor head indicators of the two slave units closest to the master unit show the judg-
ment result of the master unit.
• The response time for judgment output from the master unit is the response time setting
on the master unit and slave units plus 3ms.
<Reference>
This application can only be selected when at least two slave units are connected.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
SEN TRONIC
AG
Produkte, Support und Service
)
Master unit
Slave
unit 1
Rugghölzli 2
CH - 5453 Busslingen
FUNCTION SETTINGS
Slave
unit 2
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
5-73
mailbox@sentronic.com
www.sentronic.com