Value Entry Setting (Direct Value Entry) - Panasonic GP-X Series User Manual

3.2.2 Value Entry Setting (Direct value entry)

Setting example
Change the upper limit value from "1.5000" to "1.4000".
<Detection state>
Upper limit value
setting mode
If the key is pressed when the least significant digit blinks, the entire
value blinks.
Press the or
does not change if the value is "0").
Press
・Use as the upper threshold (H-thr) value is zero or greater.
・Enter settings so that the following equation stands true:
Upper limit value (H-thr) - hysteresis width (o-hys) > Lower limit value
(L-thr) + hysteresis width (o-hys).
POINT
If the conditions are not satisfied, an error message is displayed.
Press the
Press to select "H-thr".
Press
key in this state to change the sign of the value (the sign
to make the entire value blink.
Press or to change the sign.
key to remove the error indication. Enter the correct value.
Press to move to another digit.
Press or to change the
number.
to set.
49