Removal Method - Panasonic HG-S Series User Manual

4.
Slide each slave unit to connect the female and male connectors.
5.
Attach end plates MS-DIN-E (optional) with the flat side facing in so as to enclose the con-
nected units at the ends.
6.
Tighten the screws to fasten the end plates.

3-5-2 Removal Method

1.
Loosen the screws on the end plates
2.
Remove the end plates.
3.
Slide and remove the controllers, one at a time.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
SEN TRONIC
AG
Produkte, Support und Service
End plate MS-DIN-E
(option)
Slide
Rugghölzli 2
CH - 5453 Busslingen
INSTALLATION AND CONNECTIONS
End plate MS-DIN-E
(option)
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
3-11
mailbox@sentronic.com
www.sentronic.com