INSTALLATION AND CONNECTIONS
4.
Make sure that the rubber bellows has not become deformed as shown at below.
If the rubber bellows is deformed, rotate the bellows to restore to the normal shape.
If the rubber bellows is deformed, a load will occur when the spindle operates and damage
may result.
3-4
SEN TRONIC
AG
Produkte, Support und Service
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Rugghölzli 2
Tel. +41 (0)56 222 38 18
CH - 5453 Busslingen
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com