Panasonic HG-S Series User Manual page 50

BASIC OPERATION
<1-point teaching>
1.
Long-press the LEFT key for 2 seconds. (The number of lit increments in the circle meter
increases.)
2.
"SET1" appears in the digital display / SUB (green), and the digital display / MAIN (white)
blinks.
3.
The master workpiece is measured. To acquire the master workpiece judgment value,
press the ENTER key.
4.
When teaching is completed, "GOOD" appears in the digital display / MAIN (white), and the
HIGH set value and LOW set value are finalized. You then return automatically to the base
screen.
4-12
SEN TRONIC
AG
Produkte, Support und Service
Long-press for 2 seconds
Rugghölzli 2
CH - 5453 Busslingen
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com