Specifying Which Pages To Print; Specifying Sides To Image; Positioning The Image On The Paper; Specifying Finishing Options - Xerox DocuPrint Network Printer Series Client Manual

SUBMITTING PRINT JOBS FROM QUICK PRINT FOR WINDOWS NT 4.0

Specifying which pages to print

Specifying sides to image

Positioning the image on the paper

Specifying finishing options

6-12
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Enter the range of pages to print:
•
Click [All Pages] to print the entire document, or
•
Type the starting page in the From text box and the last
page in the To text box.
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Select the Sides Imaged:
•
Click [1-Sided] to print the document on one side of each
page.
•
Click [2-Sided] to print the document on both sides of each
page.
•
Click [Head-to-Toe] to print the document in calendar
format. Both sides of the page are printed but the position
of the image is reversed (from top to bottom) on every other
page. Head-to-Toe is also known as tumble printing.
Note: Any image shift set with the [Image Shift] option may
interfere with binding offsets set in the document file by the
application.
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Alter the page shift for the front page or the front and back page
depending on the Sides Imaged selection.
Enter a number for the x and y image shifts.
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Click the Finishing option.
Note: Finishing options listed vary by printer model.
GUIDE TO SUBMITTING JOBS FROM THE CLIENT