Maintaining Dhcp Client; Configuring Dhcp Client Logging Messages - Avaya G450 Manual

A message appears displaying the IP address and mask assigned by the DHCP server.
For example:
Interface FastEthernet 10/2 assigned DHCP address 193.172.104.161, mask
255.255.255.0

Maintaining DHCP client

For a full description of the commands and their output fields see Avaya G450 CLI Reference,
03-602056.
Use the show ip dhcp-client command to show the configuration of the DHCP
●
client.
Enter show ip dhcp-client statistics to show the DHCP client statistics
●
counters.
Enter clear ip dhcp-client statistics to clear the DHCP client statistics
●
counters.

Configuring DHCP client logging messages

1. Enter set logging session enable to enable logging to the CLI terminal.
G450-001# set logging session enable
Done!
CLI-Notification: write: set logging session enable
2. Use the set logging session condition dhcpc command to view all DHCP client
messages of level Info and above. For example:
G450-001# set logging session condition dhcpc Info
Done!
CLI-Notification: write: set logging session condition dhcpc Info
Note:
You can also enable logging messages to a log file or a Syslog server. For a full
Note:
description of logging on the G450, see Configuring logging on page
Issue 1 January 2008
Configuring DHCP client
209.
203