Administering Ds1 Parameters - Avaya G450 Manual

Administration
Hide thumbs Also See for G450:
Table of Contents

Advertisement

Configuring Standard Local Survivability (SLS)
9. Enter set name name to identify the user name for the station. Use the 1-27 character
name as specified on the Communication Manager form. Type the name string inside
double quotes.
10. Enter show to check the station administration of the station being programmed.
The report lists the station parameters. For example:
Extension
---------
49139
Note:
For currently-registered IP phones or IP Softphones, the IP address is displayed.
Note:
11. Enter exit to leave the station context in SLS.

Administering DS1 parameters

1. Enter ds1 slot-address, where slot-address is any permitted port.
The command line prompt changes to super-sls/ds1-<port-address>. If you want
to remove the ds1 trunk from the SLS administration, enter exit to leave the second-level
ds1 context and return to the (super-sls)# context, and then enter clear ds1
slot-address.
Note:
If configuration changes affecting trunk provisioning (such as, signaling and
Note:
bit-rate) are made to a DS1 trunk where the trunk and its associated signaling
group have already been provisioned, an error message instructs you that the
"Administrative change is in violation with existing trunk member provisioning",
and the configuration change is rejected.
2. Enter set name name to identify the user name for the DS1 trunk. Use the 1-27 character
name as specified on the Communication Manager form (add trunk-group n). Type
the name string inside double quotes.
3. Enter set bit-rate rate to set the maximum transmission rate in Mbps for the DS1
facility. The rate can be either 1544 (T1) or 2048 (E1).
4. Enter set signaling-mode mode-type to set the signaling mode for the DS1 facility,
where mode-type is one of the following values:
cas. Out-of-band signaling for E1 service, yielding thirty 64 kbps B-channels for voice
transmission
robbed bit. In-band signaling for T1 service, yielding twenty-four 56 kbps
B-channels for voice transmission
isdnpri. T1 or E1 ISDN Primary Rate service (supports both FAS and NFAS)
166 Administration for the Avaya G450 Media Gateway
Type
Port
Cor
----
----
----- ---------
ip4620
IPaddr local y
ip station registered at address 'aaa.bbb.ccc.ddd'
Trunk-Des
Exp-Mod
-------
n
Flash
Password
-------
--------
-
********

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents