Example Of Cdr Log With Contact Closure; Configuring Sls - Avaya G450 Manual

Configuring Standard Local Survivability (SLS)

Example of CDR log with contact closure

Figure 12: CDR log example, contact closure
G450-SLS(super)# show logging cdr file content
07/27/2005,03:59:24:(0 0 0:15:5)CDR-Informational: July 27 03:59 B 15840 PULSE 003 2
An interpretation of the entry in
Date (07/27/2005) and time (03:59:24) record when the feature was activated
●
B is the condition code. Possible values are:
●
- 7. Outgoing call
- A. Outgoing TAC call or emergency call
- B. Used for contact closure
15840 is the extension that activated the feature
●
PULSE indicates the contact closure operation (could also be OPEN or CLOSE)
●
003 is the media gateway number
●
2 is the contact closure number
●

Configuring SLS

SLS is included as part of the resident gateway firmware package that is installed as part of the
G450 gateway firmware upgrade. However, for SLS to function correctly, the following
conditions must be met:
Avaya Communication Manager must be configured for SLS and Auto Fallback. For
●
instructions on configuring SLS in Avaya Communication Manager, see
Communication Manager for SLS
Provisioning data from the PIM tool must be gathered from Avaya Communication
●
Manager and delivered to the G450 using PIM. For instructions on gathering and
delivering the provisioning data, see
gateway
If PIM is not available, the G450 can be manually configured for SLS and Auto Fallback via
the CLI. See
page 144.
SLS must be enabled on the G450. See
●
132 Administration for the Avaya G450 Media Gateway
Figure 12
on page 138.
Using the CLI to manually configure SLS administration on the gateway
is:
on page 133.
Using PIM to manage SLS administration on the
Enabling and disabling SLS
Configuring
on
on page 143.