Installing The Rear Wheel - GAS GAS MC 85 2023 Owner's Manual

13.4

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Main work
–
1
Remove nut
–
Take off chain adjuster
allow the rear wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove the chain
from the rear sprocket.
Info
Cover the components to protect them against damage.
Warning
Danger of accidents Damaged brake discs reduce the
braking effect.
–
Always lay the wheel down in such a way that the brake
disc is not damaged.
–
Hold the rear wheel and remove the wheel spindle. Take the rear
wheel out of the link fork.
S04289-10
Info
Do not operate the foot brake lever when the rear wheel is
removed.
–
Remove spacers
H00936-10
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal rings
spacers.
Long-life grease (
–
Insert the spacers.
H00937-10
.
2
. Pull out wheel spindle
4
.
1
and contact surfaces
p. 119)
WHEELS, TIRES 13
3
far enough to
A
of the
81