Power Module Removal - Delta Modulon DPH Series User Manual

7
Turn the power module's switch to the upper position (

5.8.2 Power Module Removal

WARNING:
1. Before removing any power module, make sure that the remaining power
2. Only qualified service personnel can perform the following power module
3. The power module is heavy (> 18 kg). At least two people are required for
1
Turn the power module's switch to the lower position (
module will start discharging. After discharging, the power module's LED indicator will
(Figure 5-43: Turn the Power Module's Switch to the Upper Position)
module(s) can support the connected critical loads.
removal procedures.
handling.
(Figure 5-44: Turn the Power Module's Switch to the Lower Position)
5-39
5 Installation and Wiring
).
). After that, the power