Drawbar Brace Installation
NOTE
Both braces and ends are identical.
1. Using Grade 5, 1-8 x 5 1/2" Screws and 1" Flat
2. Using Grade 5, 1/2-13 x 7 1/2" Machine Bolts, 1/2"
Figure 2-10: Drawbar Brace Installation
Washers and Nuts, attach the proper end of each
brace to the center frame.
Lockwashers and Nuts, bolt the other ends to each
other and the drawbar. See Figure 2-10.
ASSEMBLY
2-9